Klimax system: Kontrol Dynamik, Twin Chakra, DS/1 streamer

Prachtige Linn Klimax set aangeboden, bestaande uit:


Klimax DS/1 streamer (Prijs los: 3600 euro)

Klimax Kontrol Dynamik voorversterker (Prijs los: 1750 euro)

Klimax Twin Chakra Binding Post versie eindversterker (Prijs los: 2500 euro)


Prijs als set (zonder kabels): 7695 euro
Alle componenten verkeren in zeer mooie staat.

Zie beneden voor meer specs.

Wilt u Linn apparatuur inruilen, dan is dit natuurlijk altijd bespreekbaar.
Zie mijn overige advertenties voor meer mooie Linn apparatuur.

Bart Coenen Muziek
Linn occasion specialist en
professioneel pianist

Linn info:
Linn Klimax DS/1:

Plays digital music over a standard Ethernet network
Dynamik Powersupply
Streams internet radio, podcasts and 'listen again' broadcasts
Decodes FLAC, WAV, ALAC, MP3, WMA, AIFF, AAC and OGG audio formats with up to 24-bit 192 kHz native sample rate
Songcast support allows synchronised playback of audio from other DS players within a Linn multiroom system
Compatible with UPnP™ media servers and UPnP™ AV 1.0 control points
Balanced (XLR) and unbalanced (RCA) outputs
Acoustic enclosure machined from a single billet of aluminium

Technical Specifications
Reference digital stream player
• Dynamik Powersupply
• Type Digital stream player
• Dimensions (H) 60 mm x (W) 350 mm x (D) 355 mm (H) 2.3 inches x (W) 15 inches x (D) 14.2 inches
• Weight 10 kg / 22 lb
• Mains supply voltage 100 – 120 V ac (±10%) 50 – 60 Hz (auto ranging) 200 – 240 V ac (±10%) 50 – 60 Hz
• Fuse 250 V, T1.6 A (not user replaceable)
• Power consumption sleep 8 W active 16 W
• Supported file types FLAC, ALAC, WAV, MP3, WMA (except lossless), AIFF, AAC, OGG
• Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
• Word depths 16 – 24 bits
• Control protocol Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
• Control interfaces Remote control IR receiver (IR handset supplied) Ethernet 100Base-T RJ45 128 x 32 pixel front panel display
• Finishes Silver, Black Back Panel Connectors
• Analog audio Line out (L+R) 2 x RCA phono Line out (L+R) Balanced XLR
• Control Ethernet 100Base-T RJ45 RS232 (1 & 3) 4 x RJ11 Output Electrical
• RCA outputs Output voltage 2 V RMS (0 dBFS, vol. 80) Output impedance 150 O
• XLR outputs Output voltage 4 V RMS (0 dBFS, vol. 80) Output impedance 300 O Audio Performance
• THD+N < 0.002 %
• Dynamic range > 110 dB Digital Pre-amplifier
• Gain range -80 dB to +20 dB
• Gain resolution 1 dB
• Unity gain volume 80

#1087

Klimax Kontrol

• Klimax case machined from solid aluminium for superb isolation and screening of circuitry
• Dynamik Power Supply

• Short, simple audio signal path designed to optimise the purity and accuracy of reproduction


• Four inputs: one balanced, three unbalanced


• Compatible with Linn Knekt multi-room system

technical Specifications

• Type Reference quality pre-amplifier
• Input connectors Balanced: 1 set Female XLR Unbalanced: 3 sets WBT Phono sockets Pin connections: Phono-inner hot, outer hot XLR- Pin 1: OV, Pin 2: Hot, Pin 3: Cold
• Output connectors Balanced: 1 set XLR Unbalanced: 1 set WBT Phono sockets
• Fuse rating T 800 mA anti-surge
• Mains supply range 100 V - 240 Vac nominal
• Audio inputs Impedance (unbalanced) 10 k O Signal (unbalanced) 0 dBV (nominal) Impedance (balanced) 7.8 k O
• Audio outputs Impedance (unbalanced) 300 O Impedance (balanced) 600 O
• Gain range Minimum to maximum -85.5 dB to +26 dB in 0.5 dB steps
• Frequency response 2.3 Hz - 200 kHz
• Distortion (harmonic) 0.00097% (1 kHz @ 0 dBV)
• Noise floor Less than -104 dBV
• Dynamic range 119 dB
• Cross talk Channel to channel -126 dBV Source to source -120 dBV
• Power consumption 15 W
• Dimensions W 350 mm x D 355 mm x H 60 mm W 13.8 inches x D 13.9 inches x H 2.3 inches
• Weight 9 kg / 19.84 lbs

#1105

Klimax Twin Chakra

• Output power 200 W per channel (into 4 Ohm)
• Electrical and mechanical isolation between power and audio boards
• Balanced (XLR) and unbalanced (RCA) inputs
• Energy saving automatic signal-sensing circuitry
• Precision-engineered enclosure machined from a single billet of aluminium

technical Specifications

Type Reference stereo power amplifier • Dimensions (H) 60 mm x (W) 350 mm x (D) 355 mm (H) 2.3 inches x (W) 15 inches x (D) 14.2 inches • Weight 9 kg / 19.8 lb • Mains supply voltage 100 – 120 V ac (±10%) 50 – 60 Hz (auto ranging) 200 – 240 V ac (±10%) 50 – 60 Hz • Fuse 250 V, T6.3 A (not user replaceable) • Power consumption sleep 13 W active 30 W (typical) • Output power 200 W into 4 O per channel 100 W into 8 O per channel • Maximum input power 1000 W • Signal sensing threshold > 100 uV • Load tolerance Unconditionally stable into all loudspeaker loads • Peak output voltage 40 V • Finishes Silver, Black • Accessories V-klip bracket for wall-mounting Back Panel Connectors • Input Unbalanced (switch position in ) 2 x RCA phono (WBT) Balanced (switch position out) Balanced XLR • Output Standard Neutrik Speakon 4-pole connector Optional Binding posts Input Electrical • RCA outputs Input impedance 7k8 O Gain 28.6 dB Clipping level 1.05 Vrms • XLR outputs Input impedance 7k8 O Gain 22.6 dB Clipping level 2.1 Vrms Audio Performance • THD+N < 0.01 % • Frequency Response 5.3 Hz - 37 kHz

#1106